Igor's Blog

07-Jan-2017
Legeod Star Wars AT-DP kit review (fake Chinese Lego clone) - part 2
This is the second part of the Legeod Star Wars AT-DP kit review. If you haven't already, please check out the first part. This part of the review will focus more on showing the different phases of construction rather than talking about the quality of the bricks.
06-Jan-2017
Legeod Star Wars AT-DP kit review (fake Chinese Lego clone) - part 1
A while back I ordered a bunch of fake Lego kits from China and did a quick review of the included minifigs for the AT-DP kit. This series of posts completes that review. Before we get into the details however, here's a photo of the fully assembled kit (available from AliExpress)...
29-Oct-2016
Legeod Star Wars AT-DP Minifig review (fake Chinese Lego clone)
Not long ago I had a bunch of fake Lego kits arrive from China, among these was the 2016 Legeod Star Wars AT-DP. I've still not had the time to put it together but I thought I would at least make a start on the minifigs.
22-Oct-2016
Fake 'Lepin' brand Lego arrived from China
Last month I decided to order some of the fake lego that's readily being sold on sites like AliExpress. It's finally arrived now and here are my first impressions.
20-Nov-2015
That cheap Chinese 40w laser cutter I bought - it died within a month of operation
I wrote about the laser cutter that I recently bought from eBay. It was the cheap Chinese make with a 40W CO2 laser tube. Overall it was not a bad machine, but within a month of using it, and probably only making between 10-20 actual cuts, the machine broke, but it wasn't the laser tube that let it down.
08-Oct-2015
Cutting and Engraving with a 40W CO2 Chinese Laser Cutter
I had my CO2 Laser Cutter for a couple of weeks now and in case you missed it, I've written up my initial experience with it over a three part article (part 1, part 2, part 3). I've had a bit of spare time to play around with it a little more, did some cutting and engraving on various materials and at various settings. These are my findings.
01-Oct-2015
So I bought a cheap Chinese 40W CO2 Laser Cutter and it's actually OK (Part 3)
This is the third part of this article, in case you missed them, check out part 1 and part2 before you read on. Those parts run through the unboxing and setup of the machine and also mention some of its faults. This part focuses on connectivity and software.
30-Sep-2015
So I bought a cheap Chinese 40W CO2 Laser Cutter and it's actually OK (Part 2)
If you've missed the first part of this article, you can find it here. This part covers some of the faults I found with the laser cutter and how I set the whole machine up.
29-Sep-2015
So I bought a cheap Chinese 40W CO2 Laser Cutter and it's actually OK (Part 1)
I've been tossing up the idea of either getting a new 3D Printer or a Laser Cutter and then I came across Flux3D which could do both to some extent. After nurturing the idea for about a month I decided that I didn't want to mess around with another 3D Printer until they were easier to use so went for the Laser Cutter. After a number of quotes (some going into tens of thousands of dollars) I hit up eBay and found that for just $550 AUD I could buy a desktop sized laser cutter. I was sceptical, but I went for it. Read on for my experience.

Previous Post

Next Post

Programming, DIY, Games, Hacks, Tech and more.
Follow me on...
Current and Past Projects
See my Resume

Subscribe


RSS Feed

My Other Web Sites

Igor and Elise's Travels
Riverside Expressway Cam
StrFunc() Online
300 George St Blogumentary
Guru JSON-RPC Tester
Extrudifier Object Designer

Recent Blog Posts

NeoOffice Viewer macOS Word Document viewer vs Preview and Microsoft Word

Importance of cleaning the internal fans and heatsinks in a MacBook Pro

Adding an email subscribe feature to your Blog with Blogtrottr

How to remove Google's logo from your G Suite applications

Pedestal fan transformed into a ceiling fan

Testing the Velvet WiFi Hotshot signal strength

Improving slow download speeds on the PS4 and PSN

Add batch image resize functionality to macOS using Automator

Show transfer percentage and speed when copying files in Linux and Bash

So I finally got to try eating some space food

Recent Galleries

Space Food - Chocolate Ice Cream with Chocolate Chips

Legeod Star Wars AT-DP kit

DIY spare parts computer build with a RAIDMAX Anura case

Fake 'Lepin' brand Lego packaging

Hardwood garden bench with clear resin void filler

Fixing a 3D printer extruder that stopped heating up

Easily increase disk space in a Lenovo Ideapad 100S 14" laptop with an M.2 SSD

Making a multi-piece 3D printed solder spool holder stand

DIY indoor apartment grow light wiring

Good Friday Electronics fun Easter Bunny LED PCB Kit IBEABU-01.0

Top Categories

Blogs I follow

Matt Moores Blog
Georgi's FlatPress Guide
Perplexing Permutations
The Security Sleuth

Friends

RAWS Parts Online
Alpha Dimensions Hosting
Kristensen Photography
Ilia Rogatchevski
Travelling Fairy

Blog Activity

Blog Activity
Please follow me on...