Igor Kromin |   Consultant. Coder. Blogger. Tinkerer. Gamer.
 

Gallery: 40W CO2 Chinese Laser Cutter

I've been tossing up the idea of either getting a new 3D Printer or a Laser Cutter and then I came across Flux3D which could do both to some extent. After nurturing the idea for about a month I decided that I didn't want to mess around with another 3D Printer until they were easier to use so went for the Laser Cutter.

Read about my experience with this cutter in the following posts:
So I bought a cheap Chinese 40W CO2 Laser Cutter and it's actually OK (Part 1)
So I bought a cheap Chinese 40W CO2 Laser Cutter and it's actually OK (Part 2)
So I bought a cheap Chinese 40W CO2 Laser Cutter and it's actually OK (Part 3)
That cheap Chinese 40w laser cutter I bought - it died within a month of operation

Image 1 of 32
Image 1 of 32  - 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
comments powered by Disqus